Fliteboard Propeller

30.00

Strong and light, choose fibre reinforced Flite Propeller for optimum performance. Comes with nut and prop pin. Compatible with all Series.

Jobe Bungee Extension

27.00

Always use an extension to your regular tow rope to reduce stress on both your towables and boat! A 3ft (0.91m) mainline, 1 section to adjust the length of the rope that can carry up to 4100LBS (4 persons), you are free to go.

Fliteboard 500 Stabiliser Shims

25.00

Set of varying degree shims (No. 0, 1, 2) to alter your riding experience. To be used only with the Flite 500 Stabiliser Wing. Changing shims alters the amount of stabilising down-force provided by the tail, and also impacts the balance point of the foil and responsiveness. Each shim is numbered. Beginners should start with 1 or 2 and adjust based upon preference. Lower shim numbers allow faster speeds without too much front foot pressure. Higher shim numbers create more stability and responsiveness, but lead to more lift at high speeds. Compatible with all Series (Series 1 re-enforced eFoils only).

Jobe Towable Bag 1-2P

23.00

Easily store your towable with this nylon bag for durability, season after season. This bag fits 1-2 Persons towables. Easy and clean storage.

Jobe 2 Person Towable Rope

22.00

Our super strong tow ropes are engineered to pull big tubes for 2 persons, up to 1077 KG! It has an unique and notable pattern and a stainless steel hook to carry real monsters!

BBTALKIN RUBBER BAND MOUNTS

20.00

BBTALKIN RUBBER BAND MOUNTS
The BbTalkin rubber band mounts are made for mounting the intercom to any basic water helmet. The package has two mounts and two alcohol pads for cleaning the surface. The mounts come with a M3 adhesive to stick to the helmet. The mounts have rubber rings to secure the intercom in its place. This gives more flexibility when crashing due to the fact the rubber rings have stretch. This also prevents the waterproof case from breaking the backside pins. The case fits with the back pins into the mount. With the rubber mounts you secure the intercom. Before attaching the adhesive to the helmet you need to make sure that the helmet is clean and has no scratches. This will benefit the adhesive when sticking to the helmet. This set comes with two extra rubber bands.  Periodically check the condition of the rubber bands holding in your unit. Over time, they may need to be replaced, especially when using in salt water and sun. If you let the condition of the rubber bands deteriorate, you could risk them breaking which would cause it to release the unit.  This is not covered under warranty.

Fliteboard Pro Tail Cover Series 1

20.00

Black. Compatible with Flite eFoil System Series 1. Please note: this is for advanced riders only - at their own risk.

Jobe Stabilizing Bar

18.00

Make life easy and hold your skis together with the Stabilizing Bar Standard of Jobe.

Jobe Multi Rider Watersled Repair Kit

18.00

Accidents happen, so be prepared! With this kit you can repair any multi rider or watersled on the market. Don't pay to get something fixed... Do it yourself!

BBTALKIN HELMET MOUNTS

17.00

BBTALKIN HELMET MOUNTS
The BbTalkin helmet mounts set is to mount your BbTalkin waterproof case to any helmet or rounded surface. The package contains two mounts with 3m adhesive and two alcohol pads for cleaning the surface. The mount system makes it secure but easy to detach and attach without to much pressure.

BBTALKIN VELCRO TAPE FOR HELMET PADS

15.00

BBTALKIN VELCRO TAPE FOR HELMET PADS
The BbTalkin velcro tape for helmet pads (male and female side) are for the BbTalkin mono and stereo helmet speaker pad headsets (B02R & B03R). With the extra BbTalkin velcro you can replace broken or old velcro or equip other size helmets to be able to add the BbTalkin system to other helmets. Place the female velcro close and above the ear on the outside of the helmet. All our headsets have a male velcro tape on the top inside to attach to the velcro on the helmet. The mono speaker helmet pad only needs 1 velcro (left side) per helmet. The stereo helmet speaker pad needs 2 velcro’s (left and right).